It looks like you’re detailing the suspension parts and sources for a truck build, specifically for the front suspension. Here’s a summary of the information you provided:
Suspension Parts To Bring It Together Under the Truck:
- Brackets: Sourced from Barnes 4WD for mounting the front suspension components.
- U-bolts and Spring Plates: Leftover items from IH Parts America, which will be used to secure the springs in place.
- Shackles: Obtained from OffRoad Design, these will help connect the front suspension to the frame of the truck.
- Shock Absorbers: Skyjacker K-series shocks will be used for their durability and performance.
- Springs: ADX shocks are chosen to complement the springs and provide a smooth ride.
- Custom Shackle Hangers: These have been custom-built and will be frenched into the Toyota frame, providing a solid attachment point for the shackles.
Sources:
- Barnes 4WD: Contact them at 828.551.7616 or visit their website at barnes4wd.com for any bracket needs you might have.
- Eaton: You can learn more about their products at eaton.com.
- Motive Gear: They can be reached at 800.934.2727 or on their website at motivegear.com for drivetrain solutions.
- RCV Performance: Check them out at rcvperformance.com for all your performance needs.
Ultimate Adventure 2022 Official Sponsors:
- Rugged Ridge: The official Jeep accessory sponsor.
- Bushwacker: The official fender flare sponsor.
- N-Fab: The official side steps sponsor.
- Truxedo: The official bedcover sponsor.
- onX Offroad: The official mapping tool sponsor.
- IH Parts America: The official IH Truck & Scout Parts sponsor.
- Skyjacker: The official shock & suspension sponsor.
- Falken: The official tire sponsor.
- Bubba Rope: The official synthetic recovery gear sponsor.
- Warn: The official winch sponsor.
- Quigley Custom Driveshafts: The official custom driveshaft sponsor.
When you’re ready to install the shocks, you’ll want to cut the frame at the appropriate location to attach the custom shackle hangers. Then, you can bolt the shackles to these hangers and use U-bolts to secure the spring plates and U-bolts to the shock mounts. The shocks will then be compressed and positioned so that when they extend, they lift the front end of the truck as intended. Remember to consult any specific guidelines for your vehicle’s make and model, and ensure all modifications are performed safely and in accordance with local regulations.